FAQ - Kerlink Gateway
from the manual ; Please note that the pkt-fwd.sh script will automatically update the gateway_ID field in local_conf.json file, based on the gateway MAC address, so that it is sure to use a unique...
View ArticleFAQ - Kerlink Gateway
I don`t think this script wil do that ? BASE="/mnt/fsuser-1/thethingsnetwork"cd ${BASE}export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:/usr/lib"killall poly_pkt_fwdmodem_off.shsleep 3modem_on.shsleep...
View ArticleBest practices when sending GPS location data
Another simple idea:First message (after reboot of device or after reconnect to gateway after a break) contains complete Lat Lon location following one of the scheme above. Following messages contains...
View ArticleStuttgart Campaign
@mirko. Is this the same development mentioned by Johan below here http://forum.thethingsnetwork.org/t/lora-fiware/1392 ?
View ArticleFAQ - Kerlink Gateway
i did a quick dump of gateways on the TTN and if indeed Kerlink starts with AA55 then it looks like the gateway id start withs AA 55 5A 00 followed by 4 (mac) bytes gateways/AA555A00080605B7/status...
View ArticleThe Things Network Tech Update February 29th
Hi, @johan Are the powerpoint slides from the Tech Update Feb 29th be available for download? Thanks,Martijn
View ArticleClik here to view.
MultiTech M.Dot Node challenges and opportunities
Hi everyone, I just got a Multitech mDot and I was wondering if I could use it to easily build a single channel gateway with it or if I could have 2 mDots communicate directly without a gateway. I'm...
View ArticleMultiTech M.Dot Node challenges and opportunities
mDots are not designed to be used as gateways. However this is not to say it isn't possible with your own implementation of the LoRaWAN stack and communicate directly with the SX1272 LoRa chip. The...
View ArticleClik here to view.
MultiTech M.Dot Node challenges and opportunities
Thanks Andrew. The mDot is what I have at the moment and I know there are other options but I don't have any soldering skills. The LoRaWAN Gateway board for the Pi looks nice but it's only 868 Mhz and...
View ArticleClik here to view.
Support Zoological Field Studies of small mammals
@BoRRoZ: Thanks for your very helpful thoughts. Of course we would start with a proof of concept test before deploying anything. Would also have to find a sponsor for this project here in Switzerland....
View ArticleClik here to view.
TTN pros and cons
You'll be able to use any of the many gateways already available world-wide
View ArticleETSI or FCC Technical Documents on ISM Band Usage
https://www.etsi.org/deliver/etsi_en/300200_300299/30022001/02.04.01_40/en_30022001v020401o.pdf
View ArticleLoRa FeatherWing Development Breakout
Hi, I just saw a new breakout board for LoRa on the Adafruit blog: https://blog.adafruit.com/2016/03/03/lora-featherwing-development-breakout/ Cheers,Pierre
View ArticleWho owns the network?
But you're missing the point, I'm not trying to install fear, etc. There are existing laws in place which in the UK gateway providers will have to comply with, your ISP may already have T&C's in...
View ArticlePodcast interview of with luke benno of analog.io
https://www.reddit.com/r/LinuxActionShow/comments/48tfn2/interview_of_with_luke_benno_of_analogio/ Anyone puting data to this?http://analog.io/
View ArticleClik here to view.
Spreadsheet for LoRa airtime calculation
Arjan, Thanks for caring about these details! arjanvanb: LoRaWAN might have a fixed coding rate of 1? (So, CR=1.) I cannot find that in the specification. Even more: it does mention it explicitly for...
View ArticleClik here to view.
Amazon dash button equivalent
I think this thread shows we have both end-users and (hardware and software) developers on the forum. An end-user typically wants to buy the darn thing as long as it does what it should do. For a...
View ArticleNode based on Raspberry?
The used pins can be configured in the lmic_pinmap struct; see for example examples/thethingsnetwork-send-v1/thethingsnetwork-send-v1.cpp.I used GPIO6 for CS, because GPIO8 did not work immediately....
View ArticleAmazon dash button equivalent
OMG this is like Xmas @thinginnovations , can I have one? Love buttons..
View ArticleSpreadsheet for LoRa airtime calculation
Okay, I've changed my copy of the sheet to auto-enable low data rate correction for SF11..12, and to also make clear that SF6 is not used in LoRaWAN. So basically LoRaWAN users only need to adjust the...
View Article