Clik here to view.
Amazon dash button equivalent
How big a button do you want @yods ? I have a big red 100mm one. Knocked up code in 5 mins Cheers Andrew
View ArticleSupport Zoological Field Studies of small mammals
Support for Zoological Field Studies of small mammals (e.g. a specific type of mice) by capturing small mammals in "catch and release" traps (Longworth or other type). For such studies dozens or...
View ArticleWho owns the network?
Have you read the IP Bill??? Also there is an OTA network key exchange (cant remember which bit of the network does it) ...
View ArticleWho owns the network?
and @jamesc one of the points of the IP Bill (in the Post Office analogy) is that a Communication Provider must LOG every letter that is sent and record the sender and the destination ... they have to...
View ArticleWho owns the network?
I too have been wondering what legislation, if any, would apply to TTN. Dutch Internet providers are required to cooperate with taps when ordered by the proper authorities, same for the telcos. Would...
View ArticleClik here to view.
Who owns the network?
stevekennedyuk: one of the points of the IP Bill (in the Post Office analogy) is that a Communication Provider must LOG every letter that is sent and record the sender and the destination ... Good...
View ArticleWho owns the network?
That's my point, a gateway may be considered a ECN or PECN which means they can be ordered to log everything (if in UK). Even under RIP or DRIP which are in force today people can be ordered to hand...
View ArticleGemtek Outdoor Gateway
Hi All, Did anybody try the Gemtek LoRa Gateway? I saw them during MWC show and look like they have a powerful outdoor gateway? anybody has an idea about their pricing and quality?
View ArticleWho owns the network?
The gateway is simply forwarding messages, it can provide no additional insight into the contents of the messages as to where it is being forwarded which is to the ISP provider. The ISP provider have...
View ArticleLora + fiware
This is a good one. We're working with a FIWARE Lab in The Netherlands and a development partner to build an end-to-end integration with The Things Network and FIWARE. The idea is that a custom...
View ArticleLoRa module interfacing with beaglebone
Yes i Have set everything correctly (baud rate, data, stop bits etc) and hardware flow control is also disabled. But my main concern is I have not written any code for executing the commands (sys get...
View ArticleClik here to view.
Support Zoological Field Studies of small mammals
Great case example. just some thoughts/ideas: the gateway in the 'Alpine Hut', best at a high point and/or use something like this, a mobile light (ex army) 6 mtr masta computer connected to the 'hut'...
View ArticleNode based on Raspberry?
I`m trying to build a RaspberryPi node to test a gateway using a hello packet. But i cannot get it to work (yet) I have an RFM95 with the following pin-out 3v3 = VCC GND = GND GPIO10 = SPI_MOSI = MOSI...
View ArticleStuttgart Campaign
Sorry missed your Post. There is a FIWARE Project which is currently building a Generic Enabler for TTN. Do not know the current state of their development.. It's FIWARE Lab Netherlands:...
View ArticleFAQ - Kerlink Gateway
I think it is not MAC based, but serial number. Look at the format in the other gateways, it should be something like "AA555A0008060599".
View ArticleFAQ - Kerlink Gateway
I did not find any serial number on the casing or inside the Kerlink which reseambles the AA555 number
View ArticleLora + fiware
Thanks @johan. Do you know in about how much time this handler will be available? @josecastillolema do you know ConCava?
View ArticleArduino with xbee shield + mDot
hi @wills I got the mDot, multitech gateway and the programmer, from @maj email msg "The gateways we use are Multitech Conduits: http://www.multitech.com/models/94557202LFYou’ll also need an mCard:...
View Article