LoraWAN accelerometer
Twave is happy to introduce SMOVE! "Smove is a compact wireless Lora/Lorawan accellerometer based sensor. It holds all electronics (including antenna and batteries) in a 20x20x60mm enclosure. An...
View ArticleClik here to view.
Arduino UNO + RN2483 needs power interrupt to start
@w4e Thank you, that is just what i needed. About this thread's problem, i've connected digital pin #5 on my nano to pin #5 (RESET) on the bee, and executed this code: Serial.println("Reset RN2483!");...
View ArticleDevEUI for non-hardware assigned values
I've posted the program on https://github.com/things-nyc/random-eui64 in case anyone is interested. If I have time, I'll update it to do simple things like generate a block, and allow you to omit the...
View ArticleClik here to view.
RN2483 firmware versions
I can't really tell from the above release notes, but 1.0.1 might be needed for Over-the-Air Activation: OTAA with RN2483 using new backend This sounds like your RN2483 has outdated firmware (that has...
View ArticleIs there a wiki page for setting up a private backend
@htdvisser so here is what I understand, ~/.ttn.yaml on the local is overridden by the docker-compose.yml and I need to change the docker-compose if I want to override some variables? ~/.ttnctl.yaml...
View ArticleClik here to view.
Raspberry Pi LoRaWAN Gateway Board
Fabien: Do you notice some difference between this kind of home made gateway and a full professional gateway Yes, I do.A full professional gateway is a complete product, it may have open source...
View ArticleArduino UNO + RN2483 needs power interrupt to start
Using the the RN2843 Bee on an Autonomo as well as thru a XBEE USB explorer with no issues. Never tried it on a Nano or an UNO.
View ArticleIs there a wiki page for setting up a private backend
You should either use config files ($HOME/.ttn.yaml and $HOME/.ttnctl.yaml), environment variables or command line flags to configure ttn and ttnctl respectively. For Docker-based deployments it is...
View ArticleDevEUI for non-hardware assigned values
This topic was automatically closed after 24 hours. New replies are no longer allowed.
View ArticleClik here to view.
New design community page
Hi @laurens.slats,I've checked that, everything is OK now. Thanks
View Article[HowTo] Regain root access on Kerlink
To contribute to the wiki, you should fork it and submit a pull request with the changes. We're working in the rewrite branch. As soon as we have single-sign-on working, we'll make this easier by...
View ArticleClik here to view.
[HowTo] Regain root access on Kerlink
Arjan: add the photos The photos are online: http://staging.thethingsnetwork.org/wiki/Hardware/Gateways/Kerlink Thanks a lot!
View ArticleCan I run gateway on 865 to 867 Mhz
We are running our commercial LoRaWAN network in New Zealand using the 865 to 867 MHz KotahiNet. We've learnt many things and are happy to share with people looking to operate in a non-standard...
View ArticleClik here to view.
TTN in Erfurt, Germany
The campaign page is live now: http://thethingsnetwork.org/c/erfurt/
View ArticleIs there a wiki page for setting up a private backend
Thanks this makes sense. As a follow up it would be nice to have walk through that explains how to come and build code from github. In that case $HOME/.ttn.yaml and $HOME/.ttnctl.yaml becomes...
View ArticleClik here to view.
Haarlem, The Netherlands
Ah, someone took the Deloitte Kerlink gateway on a trip to Haarlem. Let's keep it here; welcome! The Thing Network Haarlem Community.png1681x998 1.53 MB (And no, it's not just the map that's off; it...
View Article