Clik here to view.
Smallest expected node
ursm: We should ask Lady Ada creating feather boards for some common radio modules done! with a link of your picture.I hope some radio boards (e.g. with RN2483 & RFM95) will flow into their...
View ArticleClik here to view.
Smallest expected node
yes I know. I asked some people to help me with designing a LoRa 'backpack for the feather products.Nobody seems to be interested so I started learning PCB design myself another idea from me is to use...
View ArticleAmount of gateway in Amsterdam
Awesome! It's really at Herengracht 182, on the rooftop of the relatively high building.
View ArticleClik here to view.
Smallest expected node
Beautiful stuff:yum: I played this weekend with the Sodaq Autonome...typical Dutch color
View ArticleIssues with 915Mhz LoRa setup
OK, let me update my request a bit. If I use the linked configuration file, it partially works-ish, sorta. I still never see the Microtech mote successfully join. However, I do see the request come...
View ArticleRaspberry Pi LoRaWAN Gateway Board
There are more in stock now. One additional thing for this radio: Be sure to change the use of the cs_change variable in the SPI driver in the loragw hal. You can run the following command in the base...
View ArticleIs anyone already working on the PetFinder use case?
Thank you for interest.. first of all tracking via LoraWAN has number of limitations.. since the tracking should be near real time, the positioning data should be streamed every <15 sec.. this way...
View ArticleIs anyone already working on the PetFinder use case?
Would it really need to be every 15 seconds? Every 2 minutes or even 10 would give you lots of positions. Otherwise as you say the data would start mounting up. I guess storing and forwarding all...
View ArticleClik here to view.
Is anyone already working on the PetFinder use case?
please, ask people who have lost their pets.. for two minutes a dog on run can pass two blocks.. any way, the scenario of pet-trucker should came upfront of technical specifications.. so called...
View ArticleIssues with 915Mhz LoRa setup
If you are using sub-band 7, you will need 48-55 and ch 70 (500kHz) to be enabled.What is your gateway? is it a multi tech box or raspberry pi with Multitech's module?If yes, send me your global...
View ArticleIssues with 915Mhz LoRa setup
Hello Rob, RN2903 has been tested well against Multitech so it will work. I would recommend checking the RX window settings and sync word being used. All are configurable in RN2903. I would also have...
View ArticleIssues with 915Mhz LoRa setup
Thanks for the quick response. I've re-enabled channel 70 (as well as 48-55 which were already active) and it didn't help the join process. Once you review my configuration file, can you explain to me...
View ArticleClik here to view.
Issues with 915Mhz LoRa setup
Does the RX1 window affect the join process? For some reason I thought that Join settings were treated separately. Regardless, I tried upping the rx1delay on my Microchip mote to 2s and 3s and neither...
View ArticleIssues with 915Mhz LoRa setup
I will admit I didn't think about it too carefully, or go and read the specs. I just recall that the default settings in Multitech were different to the defaults in RN2903. Its worth a paperwork...
View ArticleIssues with 915Mhz LoRa setup
Agreed, but I don't see a way of a getting a friendly dump of all the settings on either side... and there are a lot.
View ArticleIoT Awards
TTN wins the People's choice silver of Smart City Applications categoryhttp://iotawards.postscapes.com/2015-16/top-smart-city-application "DIY LoRa gateway" wins the People's choice silver of Best IoT...
View ArticleIssues with 915Mhz LoRa setup
RN2903 Rxdelay1 = 1000msRxdelay2 = 2000msRx2 window = DR 8 on 923.3MHzSyncword = 0x34 I looked around for info about Multitech settings on TTN wiki but didn't find anything. Clicking through to...
View Article