VPN support in Kerlink
Try PPTP for VPN, We have successfully deployed VPN in kerlink gateways using PPTP.
View ArticleCan we order the Kickstarter gateways now the campaign has ended?
Yes! We will setup a webshop. You can signup here to be the first to know: http://thethingsnetwork.us11.list-manage.com/subscribe?u=20406705fec6d7d4b2ab1d6cc&id=cf163e9d64
View ArticleClik here to view.
Team Building Barcelona
hola, quien quiera formar part de la comunidad TTN a Barcelona/Catalunya, ya se puede subscribir a la lista de correo: https://llistes.guifi.net/sympa/info/thingsnetworkbarcelona Gracias a guifi.net...
View ArticlePresentation for potential partners
Here is the presentation I use for potential partners in Poznan, Poland. Please feel free to re-use it for your purposes.PowerPoint presentation TTN_Poznan.pptx
View ArticleNumber of devices connected
As far as the number of divices a gateway can connect to is known, you can find them here: http://thethingsnetwork.org/wiki/Hardware/OverviewGateways I would recommend having more gateways then...
View ArticleLoRa WAN - Tall Buildings - Setup
Well, there is not that much experience with the exact range of TTN at this moment. Buildings (concrete, steel) affect LoRaWAN much less then they do for WiFi, but yes, they will have an effect.
View ArticlePulsnitz, Germany
Hello all! Sounds good, let's get Pulsnitz connected! Let me know if you guys have talked and are ready to start a campaign so I can set you up with a campaign page (eg....
View ArticleHardware reset RN2483 on things uno
Did you upgrade the firmware of the module or is it the original firmware?
View ArticleHardware reset RN2483 on things uno
Hi Erik, Thx for the reply, that was indeed the document where I tried to find the info (seemed most logical indeed). Thanks to Jac I found out that the information is actually in the RN2483...
View ArticleHardware reset RN2483 on things uno
@Batilan The module does not echo any characters and it requires '\r\n' (CR LF) at the end of a line. Without \r\n it will not show any output. PuTTY will not work, use a terminal program like...
View ArticleClik here to view.
Hardware reset RN2483 on things uno
OK, Thx. Indeed I found out in the mean time that communication was OK as I tried to update the firmware and saw that the update program was communicating with the module OK Thanks to the video...
View ArticleHardware reset RN2483 on things uno
found some info- http://www.disk91.com/2015/technology/networks/first-step-in-lora-land-microchip-rn2483-test/
View ArticleLoRa WAN - Tall Buildings - Setup
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleLoRa WAN - Tall Buildings - Setup
There are many factor effecting Radio wave: Shadowing – Terrain or Buildings partially reducing signal.Attenuation - Strength of signal is reduced when passing through a building.Diffraction – a...
View ArticleNetBlocks SX1272 Module
Hi Faizan, I have the LoRaWan working on Netblocks using LoRaMote base."Big" change is the SPI ABI interface (not SPI2 but SPI1). However, I have doubts on the signal strength, the distance from Node...
View ArticleFAQ - Kerlink Gateway
The ppp0 is still not the default route. Strange since you configured it right. Did you do a restart with LAN cable unplugged?
View ArticleSodaq Tatu + LoRa Bee + GPS Bee, how to set up connection?
my problem in the end was that I didn't turn on the lora bee connected on the sodaq tatu: digitalWrite(20, HIGH); // switch on lorabee in your void setup()
View Article