Clik here to view.
HOPERF95W on Arduino MEGA - not working
thanks. I've found it meanwhile and had to change according to the schema and my measurements the RST from 9 to 8// Pin mappinglmic_pinmap pins = { .nss = 10, // Nsel/nSS (10) // MOSI(11), MISO(12),...
View ArticleRN2483 Breakout?
Does anyone know where to find a board that works to breakout the pins of the RN2483? Or how to design one and order some? The LoRaBee is the closest I've found, but at 40 EUR each, is really...
View ArticleHow to parse node data?
Our node (loramote) is sending some data here: http://thethingsnetwork.org/api/v0/nodes/006A1C54/ Here is a snippet for your convenience { "data_raw": "gFQcagAAcAAPIFXZTOoQ5pGwpg==", "data":...
View ArticleClik here to view.
RN2483 Breakout?
gonzalocasas: is really overpriced considering the module itself is about 12 The LaRoBee includes a pigtail and whip antenna (at least my order did). Those parts are about 8 euros each at Farnell so...
View ArticleHow to parse node data?
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleHow to parse node data?
Are you posting json data? Or binary data? In both cases the data_plain field should contain the data, in your example it looks like there are a lot of zeros and one 1 so you are probably not sending...
View ArticleClik here to view.
RN2483 Breakout?
thanks @kersing! Ok, maybe not so overpriced, but 40 is still a lot for a node where you still need to add an mcu. I did checked the urls you mention, that's what drove me to start a new topic asking...
View ArticleHow to parse node data?
I am not sure what I am posting. It sounds like I can configure the loramote to send either json or binary?
View ArticleSODAQ - TATU - PinMode
hey there! Seems like we are trying to do the same thing. Can you share the datasheet by uploading it here?
View ArticleClik here to view.
How to parse node data?
dagga: It sounds like I can configure the loramote to send either json or binary? No, it sounds like I was asking what you are sending. I do not know what software you are using. Do you? Have you...
View ArticleSODAQ - TATU - PinMode
I was told that the Mbili has the same datasheet as the Tatu. You can find relevant information here:- http://mbili.sodaq.net/wp-content/uploads/2015/03/sodaq_mbili_rev5_sch_v1.png- and more...
View ArticleSodaq Tatu + LoRa Bee + GPS Bee, how to set up connection?
This was for me a very good introduction for the GPS part : https://iamzxlee.wordpress.com/2013/09/07/gps-bee-kit-part-1/
View ArticleLeiden, The Netherlands
Hey Jorge, @Marten seems to be from makerspace in Leiden. Maybe we can setup a meeting there. At what time is the meetup in Utrecht Monday? Work in Utrecht so might be able to go also. Greets, Ewoud
View ArticleClik here to view.
Leiden, The Netherlands
Monday 7 th there is a MakerMeet from 20:00 - 22:00, I be happy to see you then and If an special meeting is needed, we could plan so accordingly.. cheers Marten
View ArticleClik here to view.
Reading UK
Hi there,If you live in the Reading area and want to have fun with The Thing Network then please get in touch! We have got our first gateway set up and are keen to:* Add more gateways to improve the...
View ArticleClik here to view.
Smallest expected node
built the small one: Teensy-LC & RFM95W:I used this node-address: 0x5A4801AA, but without any gateway nearby I think that my "hello world" arrived only some snow flakes in the...
View ArticleCopenhagen, Denmark
Hi, I'm interested in set up TTN in Cph, I'll be putting one in Frederiksberg
View ArticleFAQ - Kerlink Gateway
Hi @Arjan We are configuring a Kerlink gateway in Brazil and have the same type of problem that you had. The gateway is sending that to Semtech (iot.semtech.com) and being listed there but when the...
View Article