Clik here to view.
MTAC-LORA-868 running very hot
RolfNoot: So am I correct if I say I only need to connect:- GND- 3.3V digital- > 3.6V analog- USB-- USB+? yesyesyesyes
View ArticleMTAC-LORA-868 running very hot
Thanks! Gonna solder some wires directly and make a quick and dirty 3V3 / 3V6 power supply. Later on I will directly use SPI to the SX1301 and make a connection to the pps input...
View ArticleClik here to view.
New addresses for cloud services: update your gateways
Thanks @kersing the error message has gone. I found a fix on the multitech site that suggests if you add a post-up line in /etc/network/interfaces you can fix the vanishing resolv.conf problem. Add...
View ArticleNew addresses for cloud services: update your gateways
It's also possible to add the desired action(s) in a separate file, for example: /etc/network/if-pre-up.d/dns #! /bin/shecho "nameserver 8.8.8.8" >> /etc/resolv.confecho "nameserver 8.8.4.4"...
View ArticleOld api offline.. Student trouble
I am quite new to TTN and working on a project for 2 weeks now using the old api. Now that the old api v0 & v0.1 have been offline for a while and it doesn't seem like it is going back any time...
View ArticleNew backend. How to connect?
Ok I can't figure out whats going wrong. I think I have my gateway set up correctly, but I don't know how to tell any more - is there anyway of knowing for sure? It is 008000000000A052. So I think it...
View ArticleNew backend. How to connect?
Quick update. I found that doing ttnctl devices register personalized 02011E07 2B7E151628AED2A6ABF7158809CF4F3C 2B7E151628AED2A6ABF7158809CF4F3C sends one (and only one) message across mqtt.
View ArticleNew backend. How to connect?
Ok I'm TOTALLY baffled. So on ttnctl subscribe and on mosquitto_sub I am getting just one message for 02011E07 and nothing for any of the other devices. To get another message for 02011E07 I need to...
View ArticleNew backend. How to connect?
Hi Mark, Are you maybe restarting your nodes between samples? This would result in the symptoms you are seeing. See also the explanation by Arjan and the advice by Jac Kersing.
View ArticleNew backend. How to connect?
@markstanleyWhat are you using for the node? Keep in mind the new back end observes the lora frame counters. The old back-end does not. So if your device resets between every frame it will have issues...
View ArticleOld api offline.. Student trouble
First of all, what data are you trying to access? The new back-end only allows access to data from devices you own.If you have your own device(s) and have registered them with the back-end you need to...
View ArticleOld api offline.. Student trouble
I'm not familiar with C# or the Mqtt library you are using, but have you logged in to the mqtt server? From staging, you need to use the App EUI as user name and the key provided by the system as...
View ArticleNew backend. How to connect?
Here's my ttnctl devices: C:\ttnctl>ttnctl devices INFO Application does not activate new devices with default AppKey INFO Found 3 personalized devices (ABP) DevAddr FCntUp FCntDown Flags02011E01 0...
View ArticleNew backend. How to connect?
Hi @Batilan, I have one device upstairs (02011E01) that has been running for weeks without resetting to the best of my knowledge.02011E07 I reset on a regular basis - is there any way to reset the...
View ArticleClik here to view.
New backend. How to connect?
markstanley: Please note that the dynamic device is the same as 02011E01 - it is an mDot based thing so has a EUI printed on the label Devices can not be dynamic and static at the same time. For...
View ArticleClik here to view.
's Hertogenbosch, The Netherlands
Probably Since I've got nothing yet, I need to start with everything. Both client devices as well as a gateway and that seems a bit much for one person in a reasonable amount of time. And...
View Article's Hertogenbosch, The Netherlands
Setting up a gateway is almost as easy as installing a wifi router, that should not be your biggest problem.
View ArticleOld api offline.. Student trouble
Did you try some standalone MQTT client to see if you get any data? Or even simply try ttnctl subscribe to see if your configuration is okay?
View ArticleLoRa GPS Tracker software specs
We have a new stretch goal for our LoRaONE Kickstarter. When we reach €75.000 we will preload all the boards with a complete CPS tracker application. With your support we can reach this target. Below...
View Article