Connection p2p with two RN2483 and LoRaWan gateway
Hello all, I saw @oetelaar, @IOT_Marco and others talking that is able to transmit data between two RN2483. My question is: It's possible to change data between RN2483 (P2P) without a gateway? Thanks,
View ArticleDownstream data packet
Are you following section 4.4 Message Integrity Code (MIC) ? MIC should be calculated for 60 | xx xx xx 00 | 20 | 01 00 (8 bytes) I guess something is wrong in MIC calculation, do you have the...
View ArticleBucharest, Romania
Bucharest's first gateway is online! See all the details in this post:http://thethingsnetwork.org/c/bucharest/post/183
View ArticleFour Channel RPi Gateway Board
Hi, I have been working on LoRa FeatherWings lately and am in need of a gateway for testing. I am going to make one based on the information in the excellent Single Channel Gateway thread, but I...
View ArticleConnection p2p with two RN2483 and LoRaWan gateway
denisber: My question is: It's possible to change data between RN2483 (P2P) without a gateway? Do you mean exchange data between them? Yes it is possible without the gatway, in p2p mode, you're...
View ArticleDownstream data packet
w4e: BTW when I look at some earlier code why do you start at 1 instead of 0 ? Oh i got my arrays confused there! Another array stores them in 1-4. Thanks for spotting this. I did a quick test and my...
View ArticleDownstream data packet
madpilot: Oh i got my arrays confused there! Another array stores them in 1-4. Thanks for spotting this. I did a quick test and my result was f0 61 8b 0f for the MIC which seems to be in line with...
View ArticleSingle Channel Gateway
torntrousers: the Gateway channel freq here. Indeed, channel 0 (868.1 MHz), SF 7, like your gateway log shows you. But your node's log shows it's transmitting on at least two channels. Given...
View ArticleAdafruit LoRa Feather
The Things Network is compliant with LoRaWAN, so any LoRaWAN device could be used to communicate with TTN.
View ArticleDownstream data packet
mac tx cnf 3 74657374 ok mac_rx 3 12EA6819EDBEA4CC700DB1DCD0995C5E Seems like my gateway is finally sending packets! The last hurdle is to make sure encryption works out, but given that I'm able to...
View ArticleMQTT Port and Flavor in Backend V1.0
thanks @janvanlit I manged to make it run, as you say, but now node-red is unable to connect to the broker... Can you tell me if the following is a normal startup of the server?...
View ArticleAdafruit LoRa Feather
The boards being based on Atmega 32u4, it will be challenging to have complex sketches running a LoRaWAN stack, but definitely interesting for small nodes. However, I don't seen any limitation to use...
View ArticleOpen-source LoRaWAN network-server
Hi @brocaar, great job ! I started the loraserver in Docker , but am not able to start semtech-bridge on host machine, getting error:"FATA[0000] could not setup mqtt backend: Network Error : dial tcp...
View ArticleHelp with first minimal set-up
Regards, I'am writing from Argentina, and we are interest in investigate and develop new products based in Lora communication paradigm. The problem is that there is no possibility to get the needed...
View ArticleGateway preference - can I influence it?
Hi, using a Arduino/RN2483 solution here and want to do some gateway coverage tests. One "problem" though: it seems that overlapping gateways are causing the node to switch sooner that I would want it...
View ArticleGateway preference - can I influence it?
Is the node changing the spreading factor? It does not switch gateways: if multiple gateways are in reach for a given spreading factor, all should receive the packet. Or is this about confirmed...
View ArticleNew addresses for cloud services: update your gateways
As we are launching The Things Network back-end 1.0, we are provisioning the cloud services to different regions around the world. Server Addresses Update your gateways' configuration to the one of...
View ArticleWhere's the staging environment?
We will provide a getting started with the new staging environment this Monday, April 18. We are still closing some issues and rewriting the new wiki. But it's great: full support for...
View Article