Gateway not showing up in list
Thanks for the reply. @johan @htdvisser Does the poly packet forward send gateway status messages? Is there a debugging flag I could turn on to get some more information?
View ArticleLoRaWAN shield for Arduino UNO?
Hi @niels I've got the same setup as you (Arduino UNO) and Dragino shield. Have you got an example of your code that you use to test it?
View ArticleConnection p2p with two RN2483 and LoRaWan gateway
osjob_t initjob; led_init(); uart_init(); debug_str("hallo\r\n"); // LoRa Standby MODE writeReg(0x01, 0x81); // Set frequency 869525000 -> 868300000 writeReg(0x06, 0xD9); writeReg(0x07, 0x61); //13...
View ArticleClik here to view.
Connection p2p with two RN2483 and LoRaWan gateway
scle: CRC disable's According to the doc of TTU it does not need an extra antenna, there's one antenna the one labeled in the picture as AF. Looking your code, I see two things different from mine,...
View ArticleClik here to view.
Is anyone already working on the PetFinder use case?
Thanks, I did follow the KS campaign but I guess I have missed that part.
View ArticleConnection p2p with two RN2483 and LoRaWan gateway
Shouldn't make a difference, disabling CRC only you would get an error in receive if the CRC is incorrect but it would give a signal. Payload length is only needed when using implicit header... So...
View ArticleConnection p2p with two RN2483 and LoRaWan gateway
Thank you very much for your help scle, I really appreciate it. I don't know neither where is the issue, maybe I should throw away this platform and go for a different one. I am run out of ideas as...
View ArticleRequest for Comments: Network Architecture
The LoraWAN specification reserves the upper 7 bits of the DevAddr as the NwkID which is intended to 'remedy roaming issues' but doesn't fully define how to resolve roaming. This means a network...
View ArticleIs anyone already working on the PetFinder use case?
They (IOTA) appear to have gone through several levels of funding (over the last 2-3 years). (http://techcrunch.com/2015/02/25/iotera-1-million-seed/)....
View ArticleOnboard/Concealed Antennas
There are some dipole options that should perform .. OK (flex)(http://www.giga-concept.fr/catalog/antennas/ism-antennas/ism-868-918/?page=1)
View ArticleClik here to view.
Raspberry Pi LoRaWAN Gateway Board
I made one based on the IMST board and the Raspberry. I made a simple "backplane" board in between to connect the IC880 to the Raspberry. The Link-labs board should be easier to connect to the...
View ArticleWho owns the network?
Why should it infringe 'privacy' you're registering a device to allow it on a network, if the security services/Police/etc want access to that data, you'd have to comply anyway. Otherwise that data is...
View ArticleWho owns the network?
It's irrelevant whether they 'have to chase' all offenders, if you're breaking T&C's you're breaking T&C's. You could also in the UK potentially be breaking the law.
View ArticleClik here to view.
Who owns the network?
stevekennedyuk: You could also in the UK potentially be breaking the law. Well good luck with the hunt for all Marine Traffic gound stations in the UK
View ArticleWho owns the network?
I don't care about 'other' cases of other people doing things, I'm asking about TTN. ISPs are being forced to monitor connections (if the new IP Bill comes into force they will be forced to log...
View ArticleLoRaWAN shield for Arduino UNO?
Hi, all arduino ported libs you can find will work nowadays, for example platenspeler's lib, check the URL 3 posts above this one only thing you need to do is connect DIO0,1,2 to any digital pins...
View ArticleSetting up Multitech Conduit Gateway for TTN
UPDATE My gateway finally registered with the network and is listed!! I still can't get my mDot to connect to the network. I'm able to join the network if I use the basic packet forward and local...
View ArticleThe LoPy on The Things Network
LoPy = ESP32 (successor ESP8266) + SX 1272- https://www.kickstarter.com/projects/1795343078/lopy-the-lora-wifi-and-bluetooth-iot-development-p/posts/1504516
View ArticleClik here to view.
Connection p2p with two RN2483 and LoRaWan gateway
Hi @ndarkness, do not give up I have two nodes like this: 868MHz RN2483 LoRa(TM) Technology Mote and managed to get them to talk to each other as described in the link @sergiosena provided earlier...
View Article