Limitations: data rate, packet size, 30 seconds/day Fair Access Policy, nodes...
Thanks for the write up. A couple of things that came to mind: 1) The number of packets for a day is limited because of the access policy, however the packets do not need to be distributed evenly over...
View ArticleSetting up Multitech Conduit Gateway for TTN
Despite the fact I can speak to the Mdot through USB and push At Commands, would I be correct in assuming the only way I can program it is to have the developer board? I've got as far as compiling...
View ArticleSetting up Multitech Conduit Gateway for TTN
Hi Jim, the easiest way is through the developer board, providing your mDot has the 8 way programming header installed. Not all variants do and I had to install this on those that didnt have it.There...
View ArticleBest practices to limit application payloads
Application payloads should really be limited, if only to comply with the TTN Fair Access Policy of 30 seconds per day. Let's compile a checklist of best practices to achieve that: Always, always,...
View ArticleSetting up Multitech Conduit Gateway for TTN
Gents, Can we move the mDot discussion to the node category and keep this thread focussed on the conduit?
View ArticleSetting up Multitech Conduit Gateway for TTN
it is related and wouldnt be the first time threads have gone wildly off topic.Its something you cant really prevent. unless you want to move all the posts yourself.
View ArticleDenver, Colorado
I'm interested in setting up a things network in the Denver or Boulder area. Please message me if you are as well.
View ArticleRaspberry Pi Based Node and Gateway Hardware Suggestions
Hi Everyone,First, thanks for starting and contributing to this project. I think LoRaWAN has some huge potential and it's great that so many people are already contributing to bring this technology to...
View ArticleSetting up Multitech Conduit Gateway for TTN
I'll start a new thread in the Nodes area. Apologies, Its just proving really quite difficult to get this stuff pulled together. Jim
View ArticleMultiTech M.Dot Node challenges and opportunities
I'm currently working with a Multitech M.Dot node and trying to get it talking to my MultiTech Gateway. The omens as always look good the reality is however some what different. I want to get a thread...
View ArticleSmallest expected node
@matthijs, @Batilan : Look here, have funRevision-2 Boards are in production. They should arrive in about 2 weeks.
View ArticleMultiTech M.Dot Node challenges and opportunities
I'll start with some really obvious questions Open a terminal session using an application such as TeraTerm with baud rate 115,200Issue these commands with the same values you set for the...
View ArticleColumbus Ohio, USA
Hello, I am looking to start a team in Columbus OH. I've got a few people who are interested, but there is always room for more. Please feel free to contact me if you live near Central Ohio.
View ArticleClik here to view.
Arduino with xbee shield + mDot
I want to use an arduino to connect to the conduit LoRa gateway, I have the xbee shield with the mDot, before I can do anything, I want to make sure the mDot is communicating with arduino, but I dont...
View ArticleSetting up Multitech Conduit Gateway for TTN
I think a lot of the information in this thread that is still relevant should ideally be put in the wiki pages. This thread is now too long to be of any use to anyone looking for useful information on...
View ArticleClik here to view.
Smallest expected node
ursm: @matthijs, @Batilan : Look here, have funRevision-2 Boards are in production. They should arrive in about 2 weeks. Looks great, I would be interested in one, however the board that @matthijs and...
View ArticleClik here to view.
Connecting iC880A-SPI concentrator to Raspberry Pi 2 Type B
I think there is a problem. How do I find the ttn address to put in this line: sendCmd("mac set devaddr AABBCCDD"); // Set own address EDIT: The problem seems to be that it never gets through the...
View ArticleRaspberry Pi LoRaWAN Gateway Board
Just an update on the installation. As suggested in this topic I'm using the following setup: https://github.com/ttn-zh/ic880a-gateway/tree/spiI ran into a problem connecting to the wiringpi git repo...
View ArticleArduino LMIC library updated
Thanks for making this available. Unfortunately I get a compiling error like this: In function 'u4_t hal_ticks()':D:\Addy\Documenten\Arduino\libraries\arduino-lmic-master\src\hal\hal.cpp:154:115:...
View Article