New Gateway Registration
on my GW the poly_forwarder supports setting GPS coordinates manually in local_conf.json under gateway_conf { "gateway_conf": { "ref_latitude": x.xxx, /* put your latitude here */ "ref_longitude":...
View ArticleNew Gateway Registration
Those options are in my config, my they do not appear in the Gateway api. I additionally have '"fake_gps": true' in the config.
View ArticleIs it possible to get node information in a mysql-database?
It's all still a test network, so expect nothing to work without modifications a year from now. Just guessing but I expect TTN will maintain data from the last X days (or hours?) after a while....
View ArticleClik here to view.
KwaZulu Natal South Africa
Second single channel gateway up. When the kickstarter ones arrive down here its a pity they will be on a frequency not actually permitted.... no2 kzn.jpg1153x634 262 KB
View ArticleClik here to view.
Creating the team in Cape Town
We have started in the East Would be fun to connect right across the country http://ttn.lpwan.uk/
View ArticleSingle Channel Gateway
Hi Batilan. At the moment a usb wifi adaptor but want to combine it with a M590E gsm module to make it a completely standalone gateway (only some power needed then).
View ArticleSingle Channel Gateway
Hi ursm, Used the board from here https://oshpark.com/shared_projects/36EsiJqR. Found out today that RST is not linked to pins. Gateway does run however. Don't know if RST is really needed for...
View ArticleNode based on Raspberry?
@ ernestopace a noob question, how would I change the frequency to 433.175 using an RFM 98(1278) I assume its here somewhere define CFG_sx1276_radio 1 define CFG_eu868 1 Many thanks for your time
View ArticleIn search of demo nodes?
hi, now our smartparcs gateways are installed now Friday we have the following question? Next friday we have our smartparcs Hackathon in Elst, Gelderland. SmartParcs stands for smart industrial areas....
View ArticleNode based on Raspberry?
The LMIC code only supports 868.1 and 915 MHz.The chip might be compatible with the SX1276, but I can't help you with all the register values for specifying frequencies etc. Good luck.
View ArticleSetting up Multitech Conduit Gateway for TTN
I have just uploaded a new installation package to github. This package contains the adapted frequencies for TTN in 868 region, the gateway specific parameters have been moved to the local_conf.json...
View ArticleIn search of demo nodes?
Hi, I have been to a few hackathons and startup weekend type things and always had the feeling the agenda was a bit vague. Do you have specific a specific outcome in mind? So you have a couple of...
View ArticleNode based on Raspberry?
Blast, seems like its difficult to be legal elsewhere! I guess the majority of devices as they roll out will be in the 868 or 915 range which will cause issues as those frequencies are used for other...
View ArticleClik here to view.
Node based on Raspberry?
Actually looking at the ISM band plan more of the world uses 433 than 868/915 so maybe I'm wrong! ISMbandplan.jpg932x553 108 KB
View ArticleIn search of demo nodes?
Yes! All the Kerlinks run the latest build (29 oct) of the poly packet forwarder. Only the things network is configured, and I won't be there to add one.
View ArticleClik here to view.
Congratulations on winning the ISOC Internet Innovatie Award 2016
As this wasn't mentioned on the Forum yet: @wienke, @johan @Fokko @popcorn, @Thomas, @htdvisser, @turiphro @devlaam @hans-d, Bob van Someren and all other fellow contributors Congratulations on...
View ArticleClik here to view.
Congratulations on winning the ISOC Internet Innovatie Award 2016
Thanks! And congratulations to you! CYtMK5fUEAA14OA.jpg-large.jpeg1024x768 121 KB
View ArticleCongratulations on winning the ISOC Internet Innovatie Award 2016
Amazing! Not to forget Bob van Someren, @turiphro @devlaam @hans-d
View ArticleCongratulations on winning the ISOC Internet Innovatie Award 2016
yes well done guys, definitely deserved, thanks for setting up this thing and share your information.
View Article