Clik here to view.
TTN Mapper with T-Beam V1.2
vorderwaeldler: I only have the serial monitor of the Arduino IDE You have shown screen shots from TTN & your gateway so you definitely have more than the serial monitor! This means you have...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
vorderwaeldler: The code for the T-Beam also contains the following line: //Set FS for RX2 (SF9 = TTN,TTS EU) LMIC.dn2Dr = DR_SF9; In my opinion, the set frequency should fit. Please remove this when...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
No hurry. We’re tinkering here, not on the run The package looks like this on the MikroTik GW: Type: RX Time: Dec/22/2024 15:57:57 Gateway ID: REMOVED-FOR-PRIVACY Message Type: Join-request Major...
View ArticleTTN Mapper with T-Beam V1.2
I have commented out the line and uploaded it again. Unfortunately, this does not change the behavior. The packages continue to arrive broken. I have installed the latest MikroTik OS (RBwAPR-2nD). I...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
vorderwaeldler: Gateway ID: REMOVED-FOR-PRIVACY descartes: A gateway EUI appears all over the place and helps us with checking status / debugging. vorderwaeldler: Payload:...
View ArticleTTN Mapper with T-Beam V1.2
It has just dawned on me that both of your EUI’s are invalid - they should have bit 0 set to 0 and for local addresses, bit 1 set to 1. So as MSB, the second ‘digit’ can only ever be an even number....
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
vorderwaeldler: Without an antenna Hummmm, never run a device (GW or node) without the antenna attached! If you have done this there is a risk that you have damaged the front end of the device. Maybe...
View ArticleTTN Mapper with T-Beam V1.2
@descartes I have just generated a new JoinEUI via the site. I have also created a new DevEUI and AppKey via the TTN console. I loaded the JoinEUI and DevEUI back onto the T-Beam in LSB format and the...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
I’ve not tried the latest v5 series and I see from the release notes that part of the work done was to make it work with the new ESP32 release which was a bit of a hot potato. Given that Terri focuses...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
I can’t program C. If you put a piece of paper in front of me and said “here you go”, it wouldn’t work I can understand the code and change things with the help of ChatGPT. (It can do Python pretty...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
vorderwaeldler: I can understand the code and change things with the help of ChatGPT. First steps, as you get more changes to make, you’ll start to figure out stuff yourself! vorderwaeldler: I can use...
View ArticleTTN Mapper with T-Beam V1.2
@descartes / Actually it turned out that the AppEUI == 0 issue was an issue with the packet forwarder for Multi-Tech gateways – we had a monoculture and we didn’t realize that this was the problem...
View ArticleTTN Mapper with T-Beam V1.2
/home/user/.arduino15/packages/esp32/tools/esp-x32/2302/bin/../lib/gcc/xtensa-esp32-elf/12.2.0/../../../../xtensa-esp32-elf/bin/ld:...
View ArticleTTN Mapper with T-Beam V1.2
Has it been changed to cope with all zeros - a convenient solution to TTS v3 that now asks for a Join EUI up front? Will endeavour to get myself up to date on v5 over the break. PS, we had a brief...
View ArticleTTN Mapper with T-Beam V1.2
Has it been changed to cope with all zeros? If “it” refers to the LMIC, it turns out it wasn’t broken. The Semtech-protocol packet fowarder for the MultiTech was dropping JoinRequests with AppEUI ==...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
terrillmoore: Changing the MultiTech gateway to use basic station solves the problem. Updating to the release of packet forwarder released two years ago will fix it as well. And that will be the...
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
vorderwaeldler: I have the feeling that the code no longer works with V1.2 of the T-Beam Given that the gateway shows valid data that seems unlikely. Which packet forwarder are you using on the gateway?
View ArticleTTN Mapper with T-Beam V1.2
Updating to the release of packet forwarder released two years ago will fix it as well. Yes, I’d forgotten that, but that’s true. Thanks!
View ArticleTTN Mapper with T-Beam V1.2
Hi! I have established a secure uplink connection on my MikroTik with the following configurations: Address: eu1.cloud.thethings.network Protocol: LNS Port 8887 API Key: yes SSL: yes
View ArticleClik here to view.
TTN Mapper with T-Beam V1.2
Small update I have tested the project TTGO T-Beam Tracker for The Things Network again. The display seems to work, only the display for the battery does not work. Apparently a new library has to be...
View Article