Clik here to view.
Balloon tracking using TTN
GARYARIES: I wanted to take advantage of this thread to ask if you are trying to send in addition to the telemetry of the globe also images use SSDV, or if you know who is working on it (SSDV on LoRa)...
View ArticleClik here to view.
B-L072Z-LRWAN1 Supported Lora Module In India
when we are running cmd in dock light it’s working perfectly but when we are running with Arduino serial it’s every time response Rx timeout also with Arduino we are getting some coded response....
View ArticleClik here to view.
Acknowledge to confirmed downlink was received (gateway traffic) but not...
Basler: I configured my node (using RN2483) to reply automatically to those messages with an acknowledge message without payload. While I guess TTN should support that, maybe the empty message is the...
View ArticleClik here to view.
Packet Loss
Gausul: Packet loss very high we only getting node info at the gateway but not getting data packet. You will need to be clearer about what exactly you mean. Are you receiving packets at the gateway?...
View ArticlePacket Loss
Please check this B-L072Z-LRWAN1 Supported Lora Module In India we are using ABP
View ArticlePacket Loss
You should not create multiple threads about the same problem. And if you want help, you’ll need to answer the question that was asked (though put the answer over there)
View ArticleQuestions about the The Things Industries Indoor Gateway 868MHz
If R13 connects LED 2 it’s probably not critical. Without the LED the gateway should almost certainly still work. If you replace the LED and start with a large resistor (say 1K) you’d probably just...
View ArticleReassign device to another application with the console
Hy, An App can have multiple APP_EUI´s. So you can simply add the APP_EUI to your app and use the device. Please take care to remove the devices from the old APP before adding it to the new APP.
View ArticleMonitor temperature
Hy, there are lots of t-sensors on the market. If you need more the temperature (like humidity, CO2 etc.) maybe www.elsys.se is worth a look (no, I get no provision…). Gateway selection depends much...
View ArticleClik here to view.
Things Conference 2020 - Picture Gallery
Round table/open discussion hosted by Wienke on possibly the most important topic for some Forumites - Replicating, rolling out and copying success for future TTN Communities, indeed discussing the...
View ArticleBalloon tracking using TTN
Yes I agree with @LoRaTracker. The max amount of data you can send through the TTN network per day is far to small to send pictures. With the PITS I would expect a range of a few hundred km, so maybe...
View ArticleClik here to view.
Things Conference 2020 - Picture Gallery
And so it ends as it began…teardown… Parting is such sweet sorrow… they have all gone now… Cue Tumbleweed…
View ArticleClik here to view.
Is starting OTAA join on SF12BW125 (EU868) LoRaWAN compliant?
I remember that discussion. It’s probably this (assuming you’ve not already found it). Start OTAA join on SF7BW125 or SF12BW125? (EU 868MHz) End Devices (Nodes) When doing OTAA join (ADR either...
View ArticleClik here to view.
Which LoRa-Module for Arduino Mega 2560 using UART
Hello everybody, I want to use the LoRa-Technology to send hourly means of sensor measurements from my node to TTN. My Mega will be packed with sensors and other elements (GPS module, SD card module)....
View ArticleClik here to view.
The LIBRARY basement part 12
Smart Grid/Substation monitoring: businesswire.com Semtech’s LoRa® Devices Detect Abnormal Energy Use in Cities Semtech Corporation (Nasdaq: SMTC), a leading supplier of high-performance analog and...
View ArticleIs starting OTAA join on SF12BW125 (EU868) LoRaWAN compliant?
I had already found that thread again but it does not give a clear answer whether the join should should start at DR5 (SF7BW125) or DR0 (SF12BW125). LMIC starts joining at DR5 and my Heltec CubeCell...
View ArticleKerlink Common Packet Forwarder Keros 4.0.4 connect to TTN
I don’t mean to unbury an old post, but CPF is actually GWMPv2 compliant, so gateways need to be declared as iBTS to work with TTN.
View ArticleSx1262 and SX1276 Point to Point communication
Is Sx1276 single channel gateway with ESP8266 works with device having sx1262. My gateway with ESP8266 and sx1276 works with devices having sx1276, but not with SX1262. So sx1262 and sx1276 are...
View ArticleTTIG "not connected"
Similar issue here. TTIG was working for months on end - two days ago it just went offline. power cycled, came up for 10 minutes, went offline. I reset, repaired with wifi, came up for awhile and then...
View ArticleCan I avoid data being shown in other gateways' Traffic in TTN Console?
Ok, so what can be the problem? I install the packet succesfully and whatever is selected in the wizard, the behaviour is not the desired… Maybe the firmware?? Does TTNpacket work with all GW updates?...
View Article