Ttig does not connect to TTN
I have the same Problem, my TTIG was now working for about 3 weeks, but since yesterday night it is not connected anymore, the green led is flashing fast, a restarting did not help.
View ArticleHelp choice gateway
I can’t wait to see the other tests because my doubts are mainly about the fact that the sensor will be in the basement. The distance will only be 100 to 200 m which will not be a problem....
View ArticleTtig does not connect to TTN
I have the same problem. My gateway has been running ok for several weeks. At the time of writing this, it has “not been seen for 9 hours”. I tried the earlier link and it’s known to TTN. I deleted it...
View ArticleClik here to view.
Single Channel Gateway
I’ve got two gateways. LG01 and OLG01 and want to connect 2 ESP32 (Heltec LoRa 32v2) One is already working, but the second one doesnt connect to one of the Gateways. I heard i have to limit the...
View ArticleWifi/BLE Paxcounter Project with ESP32 boards
Indeed, it is a great app and an amazing achievement. My desire for deepsleep is an edge case and if I had more experience of the ESP32 libraries and especially working with NVRAM then I would have...
View ArticlePacket Loss
We are using B-L072Z-LRWAN1 Discovery board, Packet loss very high we only getting node info at the gateway but not getting data packet.
View ArticleTtig does not connect to TTN
Here we are online again. It seems there was a problem with LNS within TTN network.
View ArticleSingle or Dual Channel Forwarder
Grab a multi-channel Gateway if you can. Single channel cause a lot of issues, and not LoRaWAN compatible.
View ArticleClik here to view.
Ttig does not connect to TTN
Same here, I did nothing, but after approximately 8 hours it is again online in the console. To be honest not the best experience to have 8 hours downtime in 48 hours. (As I went on air just 2 days...
View ArticleClik here to view.
Single or Dual Channel Forwarder
In the introductions is written the OLG01 (outdoor) Gateway is a dual channel gateway. And I only want to connect 2 devices. So this shouldn’t be a problem. So image I want to try it with the hardware...
View ArticleSingle or Dual Channel Forwarder
The number of channels is not related to the number of devices you can connect. A proper LoRaWAN device will use 8 channels (in TTN), so a proper gateway needs to support that too. Single or Dual...
View ArticleSingle or Dual Channel Forwarder
why then explain in the instructions how to connect to TTN and set up the gateway. that’s what confuses me
View ArticleDragino LSN-50 AT+TDC clarification & soil moisture sensor
Dear All Good day I purchased the Dragino LSN-50 recently to make a simple Soil moisture sensor. I want to take the readings and transmit every 2 hours (since no significant differences will occur...
View ArticleSingle or Dual Channel Forwarder
Yeah, too bad manufacturers/suppliers promote this hardware as being suitable for TTN. It’s not. Unfortunately, you’ll need to complain at your supplier about that.
View ArticleClik here to view.
Mikrotik R11e-LoRa8EU & wAP LoRa8 kit
We finally got the stock in, we now have cards, gateways and antennas: LinITX.com LoRaWAN LoRaWAN and LoRaWAN product categories and subcategories Regards Nick LinITX.com LinITX.com Wireless and...
View ArticleClik here to view.
Mikrotik LORA8 gateway Mikrotik wAP, R11e
Now in stock in the UK, yell if you need any help with them LinITX.com LoRaWAN LoRaWAN and LoRaWAN product categories and subcategories Regards Nick
View ArticleSingle or Dual Channel Forwarder
well, thats sad to hear. Do you understand why one of the ESP32 is connected and is working fine, but the other doesn’t?
View ArticleThe Things Node - Can't join
Hi All, Getting this error when trying to connect to the network using OTAA: Sending: mac join otaa Join not accepted: denied Check your coverage, keys and backend status. Any idea what could possibly...
View ArticleClik here to view.
DRAGINO problems and solutions topic part 2
Hi, I have Dragino LoRa/GPS Shield v1.3 and a Raspberry Pi based gateway. I have uploaded the OTAA example that comes with the arduino-lmic-master library. The pin mapping is the following: // Pin...
View ArticleDevice location cached, does not update
I have prepared a gateway for a customer, running it for tests in our office location for a short while. A few weeks ago the gateway was shipped to the customers location (in another country even),...
View Article