Setting up Multitech Conduit Gateway for TTN
Thanks @kersing I downloaded https://github.com/kersing/packet_forwarder/blob/master/poly_pkt_fwd/global_conf_multitech-eu868.json and used that as the basis for my global_conf.json. You are right,...
View ArticleLogin pages of thethingsnetwork.org and forum.thethingsnetwork.org not secure(d)
The (login) pages of thethingsnetwork.org and forum.thethingsnetwork.org are not secured (it uses the http protocol method instead of the encrypted version https). Nowadays the use of public (wifi)...
View ArticleMicrochip RN2483 use
Its not a full breakout, as most of the pins are GPIO that I wasn't interested in. I have the TX/RX, power, ground, Reset plus the CTS/RTS pins on a 7 way 0.1" spacing pins and a SMA connector for the...
View ArticleGroningen (province), The Netherlands
Hi all, I got an email that we should unite here. Makes sense, so made the topic. We already have funding for the entire provence of Groningen! So we need people who can help us inventing a smart...
View ArticleClik here to view.
Microchip RN2483 use
That's enough I found a Double Side PCB board with 1.27 mm pitch and was thinking of cutting it up to accomodate a RN2483 and some 2.54 mm headers
View ArticleClik here to view.
Microchip RN2483 use
I did something like this: 2015-11-24 07.53.40-1.jpg2816x1423 606 KB
View ArticleClik here to view.
Libelium Adds LoRaWAN for Full Compatibility with Smart Cities Networks
Waspmote sensors integrate new LPWAN radio module for large-scale IoT deployments worldwide...
View ArticleWhat is happening in Groningen?
Hi all, Groningen is very very active, but not on the forum. We first fixed the funding for the project, and then we started the search for partners who can lift this thing off the ground.And we will...
View ArticleTTN UNO - BETA release - Documentation
Tried everything I could find so far but no luck. E.g.https://github.com/gonzalocasas/thethings-uno gives output, looks like a connection is made and data is sent but isn't showing up in the api....
View ArticleLogin pages of thethingsnetwork.org and forum.thethingsnetwork.org not secure(d)
You are completely right. This will part of one of the tasks we will focus on now. You can imagine that we grew very fast and we take the month December to get everything structure, straight and...
View ArticleLogin pages of thethingsnetwork.org and forum.thethingsnetwork.org not secure(d)
The forum and main website are completely different systems though, so there won't be a shared login. We'll look into setting up a certificate.
View ArticleCommunity email addresses
I often get the question if it is possible to get a thethingsnetwork.org email address. I want to start with easy forwards. So let me know if you need one by filling in this form:...
View ArticleWhat if...?
re. @Julianlstar What I learned from the Smart Citizen Kit that interested me in particular was what the Waag Society people in Amsterdam have been doing to tackle this geek/techie-oriented project....
View ArticleTrondheim*
Our gateway has arrived. After it got IP adress via DHCP it was visible on the internet. The default user and pass is root root. That was kinda scary. Gonna try to connect the sensor nodes it came...
View ArticleTTU install docu
Hi All, Quick question. Do the TX (21) / RX (20) pins on the uno work? Been trying to connect my UNO to a CH340 but don't get any output. Programming through usb is no problem. Anyone got this...
View ArticleLogin pages of thethingsnetwork.org and forum.thethingsnetwork.org not secure(d)
Yes, I found out that these are two parallel systems. But if they can't be joined it would be nice to let people know that they need to register twice. A proper place for that would be the login...
View ArticleClik here to view.
What if...?
I think 'tech buddying' is a really good way to enable people to understand and participate. I am wondering whether this could work at a network implementation level. Perhaps we can create an open...
View ArticleClik here to view.
FAQ - Kerlink Gateway
I might be wrong here but it seems the TTN server is responding wrong to my PULL_DATA message: Screen Shot 2015-11-24 at 18.52.04.png1630x488 71.6 KB According to the Semtech documentation I'm sending...
View ArticleTTN UNO - BETA release - Documentation
Commands I'm using for successful data transfer after the module has been reset to factory settings (sys factoryRESET):sys get hweuiWait for 16 byte numbersys resetWait for 'RN2483 ....' (... depends...
View Article