TTN UNO - BETA release - Documentation
I tried indeed but no success, the program does the same every time, which looks like it's closing the com port and then just stops there. I see no activity in the serial line after that.
View ArticleSetting up your first gateway
Yep something like this must be going on, i have the feeling this part needs some testing In order to check if your gateway is running use iot.semtech.com for the moment.
View ArticleMicrochip RN2483 use
Bought the RN2483 development kit from MicrochipDirect last week.https://www.microchipdirect.com/productsearch.aspx?Keywords=RN-2483-PICTAIL They dont have stock at Farnell, Mouser etc but you can...
View ArticleSetting up your first gateway
(All API calls have limit=20 by default and max 100, which is why the lists are short by default)
View ArticleSetting up your first gateway
That makes sense, but why is it not updating? Or at least, it seems to update selectively.
View ArticleSetting up Multitech Conduit Gateway for TTN
Hi all! You guys helped out a ton, especially the post from robbo was very valuable. Unfortunately, it's not working yet. I don't have an mDot yet, only the gateway. I'm simulating messages with...
View ArticleTTN UNO - BETA release - Documentation
I agree it's a bit of a mess but I don't think you have or can damage the actual RN2483 module during to firmware update process. In addition to deleting and reprogramming the firmware probably 20...
View ArticleZwolle. The Netherlands
October 29 there was a meeting from the Sense The City initiative from Geonovum in Zwolle. According to the report Mr. Jaap Pleeging from the city of Zwolle is the guy you need! Also see this document...
View ArticleTTN UNO - BETA release - Documentation
Thanks @JamesC, I've just successfully updated the firmware, device shows RN2483 1.0.0 Oct 23 2015 14:46:12 created. Set speed to 19200, first attempt ('normal mode') failed, reconnected the device...
View ArticleMicrochip RN2483 use
Please keep us posted. I currently do quite a lot of monitoring on this band (mainly weather sensors) using SDR with standard antenna (not ideal), I also ordered a few nice 433 Mhz Lora modules....
View ArticleSetting up Multitech Conduit Gateway for TTN
lars_xithing: I see "Note: LoRa packet" in the packet forwarder log That's just data being received that might or might not be a valid packet. Stat: 7 actually is a CRC error (valid packets have stat...
View ArticleLocation by triangulation
TTN network packet routing with geolocalization .PNG1190x661 71.6 KB geo-localization by triangulation as part of the network functionality of TTN is mentioned by @johan in the recent network...
View ArticleLocation by triangulation
is it possible for a node to determine if geo location is possible on that specific location, 'how many gateways do I see >3 = ok ?'
View ArticleSetting up Multitech Conduit Gateway for TTN
Appreciate the help. I suppose I need to wait for my node to arrive then. Everything else looks good, so looking forward to it!
View ArticleSingle Channel (Low Cost) Gateway
@Thomas do you expect to publish this any time soon? Really looking forward to this I planned on doing the same, but as you seem to be so close I decided to spend my time on other stuff. If I can help...
View ArticleLocation by triangulation
@Arjan I don't fully agree about not using GPS in nodes: you could have the GPS turned off completely and let a another sensor (movement, change of angle, noise) be the trigger to turn the GPS on and...
View ArticleLocation by triangulation
@FredH in the situation that geo localization by the network is not possible, because there are not enough gateways in range, a gps unit can be switched on.but that would be a cold start and therefore...
View ArticleSingapore - First Meetup
Hi, new in this forum. I am interested in a network project in Singapore.We are developing care and healthcare prevention services based on smart meters, co-development with hospital, care ngo and...
View Article