Setting up your first gateway
I have the Kerlink Gateway up and running, but I cannot see anywhere if it is working. How to check this? The croft servers seems not responding: http://croft.thethings.girovito.nl:8083/ ?
View ArticleFirewall friendly LoRa gateway implementation?
Do you really need any port forwarding if you want to setup just a gateway? The only incoming connection is via radio (the LoRa part itself), the rest is outgoing, the packet forwarder in the gateway...
View ArticleOutdoor gateways
From the picture it looks like a SMA connector. I remember someone confirmed this but I can't find the post. I see no reason why they would include a fixed antenna.
View ArticleSetting up your first gateway
@maarts Check the API @ http://thethingsnetwork.org/api/v0/
View ArticleSetting up your first gateway
Bin there, but it shows only 20 gateways (and not mine). The page www.ttnstatus.org shows many more. What should be my next step?
View ArticleFree course on The Internet of Things
For those interested, Future Learn will be running a course on IoT starting next week. Information @ https://www.futurelearn.com/courses/internet-of-things From the course description: This course is...
View ArticleSetting up your first gateway
Gateways are only shown on that page when sending status information. Are you running a GPS forwarder (set to fake GPS with manual configuration if no actual GPS present) or a basic forwarder? If...
View ArticleOutdoor gateways
Thanks guys! So far I'm leaning towards getting this IP65 enclosure and hook up the gateway via WiFi.
View ArticleSetting up your first gateway
I see traffic going from the kerlink to 54.229.214.112. 2015-11-16 19:21:12 Information Firewall type=ACL...
View ArticleSetting up your first gateway
Running with NAT as well, traffic in both directions, using connection tracking on the firewall. Running 'tcpdump -i eth0 -n -vvvX host 54.229.214.112' on a MultiTech: 19:30:02.060869 IP (tos 0x0, ttl...
View ArticleClik here to view.
Setting up your first gateway
My firewall logging was off for capturing packets from WAN to LAN, the tcpdump command gives similar output as yours. Pasted image700x337 18 KB
View ArticleSetting up your first gateway
Ok, looks right to me. If you are using the basic packet forwarder this is all you will see until a node sends data to TTN using your gateway as the basic packet forwarder does not send status...
View ArticleSetting up your first gateway
Thanks. I have an arduino node with me, but have still to do the programming to get the test data. Is there an other way to generate test data from a PC, the gateway itself or Mac?
View ArticleOutdoor gateways
Just got the word from Wienke that a 2 m. extension cable for the antenna is no problem at all. Watch out to use low-loss antenna cable with the right frequency range! Wienke did not confirm the...
View ArticleSingle Channel (Low Cost) Gateway
Thanks you Thomas for your insight.I have some Multitech mDot coming in 1 or 2 weeks, so i will try to port the source code to work with SX127x RF modules and do some tests.Regards,Victor
View ArticleTTN UNO - BETA release - Documentation
I am also exploring the RN2483 module and wanted to clarify your results. I backed the kickstarter and look forward to the gateway. Until then I have built the RaspberryPi+Ecard gateway as posted by...
View ArticleFirewall friendly LoRa gateway implementation?
You make a good point. Port forwarding is probably not needed but opening port 1700 is. This requires IT involvement on a typical company network. I was not aware that MQTT had been rolled out - but...
View ArticleClik here to view.
$30,- gateway. Who is gonna fix it?
Back out there on the countryside, there is no WiFi available. I stick to triangulisation of gateways as a network based feature for more use cases than the boring WiFi geolocation
View ArticleMQTT and Node RED now available in demo environment
Thank you very much for providing this! During tests last night I noticed several packets available in the API we're not showing in mqtt as well as packets in mqtt not being available in the API. I...
View Article