RFM95 vs RFM95W
I want to order a few RFM95 modules in China but I wonder if there is some technical difference between the 95 and the 95W. I can see on this pictureRFM95 backsidethat there is a box for...
View ArticleTTN Gateway
Hi @nestorayuso , I followed your DIY HOWTO using a Jetson TK1 and it seems to work OK (I didn't even need to do any soldering!) but this begs the question; can I just use the Multitech mini-PCIe card...
View Articleic880a concentrator with Raspberry pi Gateway
After issuing the command sudo tail -n 40 -f /var/log/daemon.log , I was able to retrieve the data but there was one error, "Failed to start the concentrator"
View Articleic880a concentrator with Raspberry pi Gateway
I was able to see the EUI and recorded it down. How and where does someone head to REST API , I have not been a linux user so am not yet familiar with the commands. Thanks
View ArticleSingle Channel Gateway
VIAs underneath modules should not be a problem as long as the antennas are clear. However I'm wondering if this amount of vias is required. Have you tried solving the puzzle the other way around?...
View Articleic880a concentrator with Raspberry pi Gateway
Use the browser to access the API: http://thethingsnetwork.org/api/v0.1/gateways/here_goes_your_eui
View ArticleClik here to view.
Gateway IMST IC880A / RBPI
wernern: Version of calibration firmware not expected @wernern did you manage to resolve the issue?
View Articleic880a concentrator with Raspberry pi Gateway
Sorry for bothering you but still that link cant open in my browser. Its blank . Wish I could send you a screenshot of the same
View ArticlePowering RPi with ic880a concentrator gateway
The root problem is that the gateway is reporting that it cannot start the concentrator after issuing the following command sudo tail -n 40 -f /var/log/daemon.log I have realised that if I power the...
View ArticleClik here to view.
mDot data not received by mTech gateway
maj: global_conf.json hi Andrew!,i tried that, but is already enabled, /var/config/lora/global_conf.json"radio_1": { "enable": true, "type": "SX1257", "freq": 868500000, "rssi_offset": -166.0,...
View ArticleClik here to view.
Gateway IMST IC880A / RBPI
This seems similair github.com/Lora-net/lora_gateway Issue: Version of calibration firmware not expected, actual:8 expected:2 opened by norbertherbert on 2016-03-12 closed by norbertherbert on...
View Article2.4 Ghz IOT Gateway
The Things Network Gateway itself is going to have built-in Bluetooth support, which is 2.4GHz, so something must be possible?...
View ArticleClik here to view.
2.4 Ghz IOT Gateway
torntrousers: The Things Network Gateway itself is going to have built-in Bluetooth support, which is 2.4GHz, so something must be possible? the question was ' max 1 KM radius ' .. not 100 mtr, so the...
View ArticleClik here to view.
Acknowledgements/downlink (ACK) RFM95W [SOLVED]
Currently I am trying to get Acknowledgements (ACK's) to work with the RFM95W. The setup consists of a Arduino Pro Mini directly connected to a RFM95W with an 8.6 cm antenna. Furthermore I have a...
View ArticleClik here to view.
Gateway IMST IC880A / RBPI
@gonzalocasas and @9600. Not yet resolved, I gave up on Sunday . I will try with a new Setup. Better cabling and a stronger Power Supply has been ordered. Thanks for the help.
View Articleic880a concentrator with Raspberry pi Gateway
Yes, your gateway is not starting correctly.
View Article