MQTT Port and Flavor in Backend V1.0
@htdvisser I would rather to run it, indeed, but I don't know where to find docs on how to connect my lora gateway to my mqtt server running under linux. I have tried to just git clone the repo, then...
View ArticleMQTT Port and Flavor in Backend V1.0
@ndarkness: Are you trying to run the V1.0 backend (under development) or use the existing demonstration backend?
View ArticleMQTT Port and Flavor in Backend V1.0
@nmap I got a gateway from Kerlink v2.2 software, so I assume that they are using that version, but not sure. I was just looking for some software/server where I can read the data given by the gateway...
View ArticleMQTT Port and Flavor in Backend V1.0
In that case, you can follow the instructions on the Wiki for using the demonstration backend on Croft. Kerklink will use a "packet forwarder" not developed by TTN. It forwards packets to the "croft"...
View ArticleClik here to view.
MQTT Port and Flavor in Backend V1.0
@nmap Thanks for the help, it is really appreciated. I am wondering what is the advantage of connecting my gateway to the croft backend, is it just to have access to the API you have developed? nmap:...
View ArticleClik here to view.
MQTT Port and Flavor in Backend V1.0
ndarkness: I am wondering what is the advantage of connecting my gateway to the croft backend, is it just to have access to the API you have developed? Your gateway is programmable. You can program it...
View ArticleClik here to view.
MQTT Port and Flavor in Backend V1.0
nmap: The value of TheThingsNetwork is the standardization of the infrastructure so that everyone may share and our devices can freely roam. Ok crystal clear! I did know that I can program my gateway,...
View ArticleDownstream data packet
Hi all, I'm currently working on developing a server for testing things with LoRa. So far I have managed to receive and parse data from a mote. However, I want to be able to send a message back to the...
View ArticleClik here to view.
Single Channel (Low Cost) Gateway
Thomas: You could tune the transmission speed (SF) to ensure that all nodes can reach the gateway, and then fix the setup at that speed. All nodes are then required to use that SF. For small scale...
View ArticleDownstream data packet
Probably there is a problem in your implementation of the LoRaWAN specifiaction since your packet is only 6 bytes while the Semtech packet is 26 bytes. Sorry, I don't have a working code. If you want...
View ArticleClik here to view.
The Things Uno SDK
johan: This library is intended to be more accessible than the SODAQ_RN2483, ... Feel free to tell me what we did wrong (besides not having RN2903 support)
View ArticleClik here to view.
MQTT Port and Flavor in Backend V1.0
ndarkness: if I needed to create my own Lora network @ndarkness: Did you ask yourself the question "why do I need to create my own Lora network"?. If that is about keeping the generated data to...
View ArticleClik here to view.
The BARGAIN basement
NEO-6M GPS Module € 5,38http://www.aliexpress.com/wholesale?spm=2114.01010208.8.25.8qjldi&initiative_id=QRW_20160411105516&SearchText=gy-neo6mv2+new+gps+module&productId=32576382110...
View ArticleClik here to view.
My gateway does not show on the map
Yes there it is I have also updated the config of the single_channel_gareway and now it is visible in the map of: http://ha-23.eradus.eu/croft.html but not in: http://www.ttnstatus.org/It also seems...
View ArticleClik here to view.
Single Channel (Low Cost) Gateway
Just to be sure future readers understand that part too, though I think you understand: nmap: a deployment could get off the ground inexpensively using single-channel gateways. They would implement...
View ArticleClik here to view.
Single Channel (Low Cost) Gateway
nmap: If we standardized default join channels and DR by region, then a deployment could get off the ground inexpensively using single-channel gateways. They would implement the LoRaWAN spec and be...
View ArticleClik here to view.
New team members
@Mirmit Hi, thank you for your answers ! You are perfectly right about the budget, it certainly miss at least a digit And indeed I think that the goal is to make the LoRa network a part of a bigger...
View ArticleSingle Channel (Low Cost) Gateway
I have started up a simple single_channel_gateway for experimental purpose, the most interesting parts have to do with coverage and it also gives me the opportunity to play with the RN2384. But as...
View ArticleClik here to view.
Universal LoRa(WAN) gateway limitations, because physics?
In this recent blog post from prof. Maarten Weyn of the University of Antwerp in Belgium, he estimates capacity limitations of LoRa(WAN) and SigFox gateways with computer simulations. The model...
View ArticleClik here to view.
Universal LoRa(WAN) gateway limitations, because physics?
Since I am not allowed to have more than 2 links in my original post: the following are my simulation results: lora.png2034x1352 58.6 KB You can find my Ruby simulator here:...
View Article