Clik here to view.
Raspberry Pi LoRaWAN Gateway Board
I am looking for an enclosure for my RPi and iC880 too. May I know where did you get this from? Thank you!
View ArticleLoRaWAN shield for Arduino UNO?
Hey @niels en @thom, I have the Dragino shield from @dragino. I have plugged it into an Arduino Mega, however it is not working properly for me. The steps I have taken: Downloaded the LoRa-LMIC-1.51...
View ArticleRN2483 433MHz problems
UK (Suffolk England). I'm interested in using the RN2483 for a non-LoRaWAN application - but I found it a bit limiting e.g.: No SF6 available (only SF7 and above supported) Only Lora Bandwidth values...
View ArticleRN2483 433MHz problems
You're on your own there. This forum is for discussion of TTN and LoRaWAN.Your best option is to visit the microchip forums. Andrew
View ArticleLoRaWAN shield for Arduino UNO?
Alright I just tried the arduino-lmic-v1.5 library instead of the LoRa-LMIC-1.51library. It works now, I can see data being received on the TTN API. Currently I am using an Arduino Mega, thus the...
View ArticleParse data
Hi Anton Can You share the solution ? I am trying to decode the data fron TTN but without success. Thanks Vidal
View ArticleClik here to view.
Raspberry Pi LoRaWAN Gateway Board
I was afraid no one would ask . The box is from klikaanklikuit type OWH-002 and is sold by mediamarkt.nl for 9 Euros at the moment and at other shops in the Netherlands for a little more. I guess that...
View ArticleLoRaWAN shield for Arduino UNO?
@kibet keep us updated. This afternoon I will move closer to a gateway to see if I get a connection then.
View ArticleClik here to view.
Raspberry Pi Based Node and Gateway Hardware Suggestions
Been watching the digikey stock of MTAC-LORA-915 - dropped from 19 on March 3, 2016 and now down to 10 on March 16
View ArticleClik here to view.
Who owns the network?
You say "With the last point the response I received from OFCOM wasn't particularly insightful referring to the General Conditions of Entitlement...
View ArticleEnergy harvester
@Twave03, as for using it with LoRa, you might be interested in a link @BoRRoZ posted earlier: Energy Harvesting May Break LoRa, SigFox LPWANs.
View ArticleTTN in Geneva/Tunis
We want to launch (me and my company) a Lora Network (TTN) In Geneva and Tunis We want to launch a Lora Gateway with a raspberry pi + LoraI want to try this...
View ArticleRealtime map
The map works now with colors, when a gateway goes down, it chages from green to red. Some other issues fixed as well (e.g. issues with IE)
View ArticleLoRaWAN shield for Arduino UNO?
Does anyone know of a Lora shield for arduino which hosts the RN2483 module from microchip (which i can buy now)?
View ArticleM-Linux versus node-RED
Hi: Conduit comes in two versions one running Node-RED andmLinux. When you purchase the gateway, you must select one of them. We have adoubt about which to choose (Node-RED or mLinux). We are...
View ArticleHow to actually connect to a public LoRa gateway?
Hi Lokem Have you had a look at this http://www.libelium.com/development/waspmote/documentation/lora-gateway-tutorial/
View ArticleHow can it be pushed data from LoRa gateway to TTU mote?
Hello all, I was wondering how would it be possible to send data from a LoRa gateway towards any mote in the Lora network. I see that my Kerlink Lora gatewy has got a feature called "push data to a...
View ArticleHow can it be pushed data from LoRa gateway to TTU mote?
Hi ndarkness, LoRaWAN protocol only opens receive slots after sending (in class A). You have to send something and then you will be able to receive. Use mac tx command and look for a mac_rx response.
View Article