Following the clear video and instructions, we successfully upgraded three RN2483's (which were running a 0.95 version) to 1.0, using Windows 10.
With two others we needed to walk the bootloader path but that did not work out.
We tried about 5 times (unplug/plug etc) but got the errormessage mentioned below in the java console.
Any suggestions, should we keep retrying, or consider these two to have gone to meet their ancestors ?
5503FD0055AA00030000WRITE
WRITE
5503FD0055AA00030000WRITE_DONE
FFFFFFFF5503FD0055AA00READ
5503FD0055AA40420000WRITE
WRITE
5503FD0055AA40420000WRITE_DONE
030000015503FD0055AA40READ
5503FD0055AA80810000WRITE
WRITE
5503FD0055AA80810000WRITE_DONE
420000015503FD0055AA80READ
5503FD0055AAC0C00000WRITE
WRITE
5503FD0055AAC0C00000WRITE_DONE
810000015503FD0055AAC0READ
5502400055AA00030000F5EF01F0FFFFFFFFE1CF28F0E2CF29F0D9CF2AF0DACF2BF0F3CF2CF0F4CF2DF0F6CF2EF0F7CF2FF0F8CF30F0F5CF31F09DB09EA003D0DDEC6AF042D09DBA9EAAWRITE
WRITE
5502400055AA00030000F5EF01F0FFFFFFFFE1CF28F0E2CF29F0D9CF2AF0DACF2BF0F3CF2CF0F4CF2DF0F6CF2EF0F7CF2FF0F8CF30F0F5CF31F09DB09EA003D0DDEC6AF042D09DBA9EAAWRITE_DONE
0000000000000000000000READ
Trying to Disconnect: COM12
Disconnection Successful
No FED Selected by the user
In Bootloader Failure