I'm able to join the network now and send data using AT commands, but the packet forward log doesn't log any of the data I'm sending. I've also check the nodes web service and noting is showing up there either, but my gateway is active and is send data according to the gateway web service. I just keep seeing this in the log file. Not sure what I'm missing...
##### 2016-03-12 04:09:38 GMT #####
### [UPSTREAM] ###
# RF packets received by concentrator: 0
# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
# RF packets forwarded: 0 (0 bytes)
# PUSH_DATA datagrams sent: 1 (192 bytes)
# PUSH_DATA acknowledged: 0.00%
### [DOWNSTREAM] ###
# PULL_DATA sent: 3 (100.00% acknowledged)
# PULL_RESP(onse) datagrams received: 0 (0 bytes)
# RF packets sent to concentrator: 0 (0 bytes)
# TX errors: 0
### [GPS] ###
# Invalid gps time reference (age: 1457755778 sec)
# no valid GPS coordinates available yet
##### END #####
INFO: [down] for server 54.72.145.119 PULL_ACK received in 123 ms
INFO: [down] for server 54.72.145.119 PULL_ACK received in 124 ms
INFO: [down] for server 54.72.145.119 PULL_ACK received in 126 ms
##### 2016-03-12 04:10:08 GMT #####
### [UPSTREAM] ###
# RF packets received by concentrator: 0
# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
# RF packets forwarded: 0 (0 bytes)
# PUSH_DATA datagrams sent: 1 (192 bytes)
# PUSH_DATA acknowledged: 0.00%
### [DOWNSTREAM] ###
# PULL_DATA sent: 3 (100.00% acknowledged)
# PULL_RESP(onse) datagrams received: 0 (0 bytes)
# RF packets sent to concentrator: 0 (0 bytes)
# TX errors: 0
### [GPS] ###
# Invalid gps time reference (age: 1457755808 sec)
# no valid GPS coordinates available yet
##### END #####
INFO: [down] for server 54.72.145.119 PULL_ACK received in 124 ms
INFO: [down] for server 54.72.145.119 PULL_ACK received in 122 ms
INFO: [down] for server 54.72.145.119 PULL_ACK received in 127 ms